Body panels pinstriping
looking at the front fender
details |
 |
 |
| The
stripes differ slightly in width and
spacing. and the outermost stripes run some 9 mm from the edge of the fender. Looking closely at
the alignments of the centering of corners, alignment of ends etc, makes it clear that this is
manual decoration work on an industrial product, not very consistent, buy not at all bad viewed
without a vernier caliper in hnd |
 |
 | On each side of the
front fender there are three layouts of double pinstriping and the stripes
The alignment of
the ends is not perfect at the rearend either and it is even more clear here |
|
There are variations both to the width of the stripes,
the distance between the twin stripes and the distance from the outermost stripes to the edge of the
panels.
| Stripes | measured dimensions | variations | suggested means |
|---|
| a single pinstripe | 1.7mm - 2.4mm | 0.7mm | 2mm or 5/64" |
twin pinstripes
on front fender | distances in between
variates between
2.5mm and 3.4mm | 1 mm | 2,8mm or maybe 7/64" ? |
|